THE PROCESS - INSTALLING THE KINGSPAN WALL PANELS
The process of installing the kingspan architectural wall cladding commences once the building has been anchored and tensioned. Three wall panels per bay are laid horizontally on top of each other. The bottom two panels are 1000mm in height and the top panel is 600mm.
The panels are bolted and fixed to the main structure and bolted to 170 galv steel purlin substructure. The KS1000MR & KS600MR insulated panels create a robust and secure exterior wall system. Base galv flashing and trim flashing seals the cladding to the foundation plinth and to the Sprung building.
The membrane is the attached to the top of the upper 600mm panel
by a colour coordinated pressure plate and cap.
The KSMR Series Insulated Micro Rib Panels are BS 476 fire rated.
Requires Adobe Reader
GENERAL PROCEDURES
- Layout & Assembly
- Erect Frame
- Installing Fabric Panels
- Tension & Anchor
- Installing the Kingspan Wall Panels
- Close End
- Options
